 |
Description |
|
|
|
Specification |
|
|
|
Gallery |
|
|
|
Customer Reviews |
|
|
|
|
What's in the box? |
|
|
|
Videos |
|
 |
Join the digital revolution
You've probably already invested in your HD ready TV why not bring it to life with the DSI86 HD receiver? Using your existing satellite dish, you can now access to up to 140 TV and 24 radio channels*, including High Definition channels, all subscription free and with no monthly charge! And BBC iPlayer** means that you are able to catch-up on your favourite BBC programmes from the last seven days or catch-up on the entire series you may have missed, whenever you want. What are you waiting for? Get digital, get the Sagemcom DSI86 HD receiver!
|
*NB The DSI86 is a receiver only.
**NB Minimum 1 Mbps broadband connection required.
This model does not record, rewind or pause live TV.
Satellite dish required for use.
Technical specifications
TRANSMISSION STANDARDS
DVB-S, DVB-S2, MPEG-2/MPEG-4
SATELLITE FRONT END
Satellite RF input
Input frequency range: 950 to 2150 MHz
RF input level: -60 to -25 dBm
Input impedance: 75 Ohms unbalanced
IF bandwith: 36 MHz
Electrostatic Overload protection: 15 KV
LNB supply
Vertical supply voltage: 12.5V to 14V
Horizontal supply voltage: 17V to 19V
Current: 350 mA max, Overload protected
SATELLITE DEMODULATOR
DVB-S
Constellation: QPSK
Roll off factor: 0.35
Symbol rate: 10-30 MS/s
Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-S2
Constellation: QPSK or 8PSK (CCM mode)
Roll off factor: 0.20 ; 0.25 ; 0.35
Symbol rate: 10-30 MS/s
Code rate: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 (QSPK) 3/5, 2/3, 3/4, 5/6, 8/9, 9/10 (8SPK)
PROCESSOR AND MEMORIES
Processor: ST 7111 YUC 450 MHz /800 Mips
RAM memory 256 Mbytes DDR2
Flash memory 32 Mbytes
EEPROM emulated into Flash
VIDEO DECODING
MPEG2
Standard MPEG-2 MP@HL for 50 Hz
Input rates (max): 15 Mbit/s
MPEG-4 Part 10 / H.264
MPEG4 AVC HP@L4 (HD) for 50 Hz
Input rates (max): 15 Mbit/s for HP@L4
MPEG4 AVC HP@L3 (SD) for 50 Hz
Input rates (max): 10 Mbit/s for HP@L3
AUDIO DECODING
Stereo 2.0
MPEG-1 layer I & II (Musicam)
MPEG-2 layer II
MPEG-1 layer II Audio description in Broadcaster mix mode
Sampling rates 32, 44.1 or 48 KHz
AC3
Originally received beatstream (pass through)
Two channels PCM down-mixing
E-AC3
Originally received beatstream (pass through)
Transposed in AC3
Two channels PCM down-mixing
OUTPUT RESOLUTION FORMAT
For HD broadcast on HDMI
1280x720 @ 50 Hz (progressive)
1920x1080 @ 25 Hz (interlaced)
Unscaled (original format) or scaled 576i and 720p by set up menu
Zoom function on HDMI: 4/3, 14/9 zoom, 16/9 zoom and Full screen
For SD broadcast on HDMI
720x576 @ 50 Hz interlaced
Unscaled (original format) or scaled
720p and 1080i by set up menu
Zoom function on HDMI: 4/3, 14/9 zoom, 16/9 zoom and Full screen
Format function on SCART
4/3 and 16/9 with conversion Pan and Scan, Letter box
SD INPUT/OUTPUT
TV SCART
RGB, PAL, Audio R/L
VCR SCART
PAL, Audio R/L
HDMI OUTPUT
HDMI version 1.3
HDCP version 1.3
Rely on the (E)EDID HDMI information returned by the display device
VIDEO
RGB
AUDIO
2 channels PCM in case of MPEG1
AC3 down mixed in 2.0 in case of AC3 beat stream
E-AC3 down mixed in 2.0 in case of E-AC3 beat stream
AUDIO OUTPUT
Electrical S/PDIF
2 channels PCM in case of MPEG1&2
AC3 in case of AC3 beat stream
AC3 transposed in case of E-AC3 beat stream
HiFi and Scart
Mono stereo in case of MPEG1&2
2 channels down mixed in case of AC3, E-AC3
UG 253253861-A DSI86 HD Freesat UK.book Page 30 Mercredi, 22. juillet 2009 1:44 13- 31 -
DATA PORT
Ethernet 10/100BT
Fully integrated IEEE 802.3/802.3u
10/100 base T-Physical layer
Auto-negotiation 10/100
Full/Half Duplex
Adaptive equaliser
Baseline wander correction
Host USB
2.0 High speed (480 Mbits/s)
FRONT PANEL
4 x 7-segment amber display
1 x IR sensor: 38 kHz
1 x Bicolor LED
3 x Buttons (P+,P-,ON/OFF)
1 x Smart Card reader
1 x USB 2.0 connector (Type A Host)
REAR PANEL
1 x RJ45 (Ethernet 10/100BT)
1 x IEC169-24 female (satellite in)
2 x SCART (TV, VCR)
3 x RCA (Stereo L/R, S/PDIF)
1 x HDMI
POWER SUPPLY
External AC/DC adapter
AC: 220-240 V ~50 Hz
Max. Power consumption: < 22 W
Standby mode: < 2 W (standby inactive)
PHYSICAL SPECIFICATIONS
Size (wxdxh): 310x175x41 mm
Weight: ~0,7 Kg (package: ~1,6 Kg)
Operating temperature: 0°C to +40°
Storage temperature: -25°C to +65°C
What's in the box
Sagemcom DSI86HD receiver
1 x External AC/DC adapter (1.2 m)
1 x Power cord
1 x Remote control (range: 7 m)
2 x Saline 1.5 V batteries (AAA type)
1 x HDMI cord (1.5 m)
1 x Installation guide
1 x freesat presentation leaflet
1 x User manual |
