 |
Description |
|
|
|
Specification |
|
|
|
Gallery |
|
|
|
Customer Reviews |
|
|
|
|
What's in the box? |
|
|
|
Videos |
|
 |
Spoilt for choice?
Freeview+ RTI90-500 T2 recorder gives you access to over 50 TV and 24 radio channels including HD channels, giving you more choice and the 500GB hard disk means that you never have to miss your favourite programme again; just set up your recording from the 8 day TV guide or you can even record the entire series at the touch of a button. With the Twin Tuner you can watch one digital channel while recording another or record two channels simultaneously whilst watching a previous recording. Picture in picture will even let you keep an eye on one channel whilst watching another. You wont miss another moment with the Sagemcom Freeview+ box.
|
 | Family friendly The personalised library within the RTI90-500 T2 means that each member of the family can store recorded content in their own folder making the massive 500GB storage space easily organisable. Parental locks means that you can keep those younger members of the family safe from mature content by locking selected channels or even the whole set top box. |
Technical specifications
DUAL DVB-T/T2 FRONT END
RF INPUT
2 RF tuners (w. internal splitter)
Input frequency range: UHF470-862 (8MHz bandwidth)
Input signal level: -90 to -20 dBm
Input impedance: 75 Ohms unbalanced
Tuning step 166,66kHz
DVB-T DEMODULATOR
Transmission mode: FFT 2k & 8k, MFN and SFN network supported
Constellation: QPSK, 16-QAM & 64-QAM
Guard interval: 1/4, 1/8, 1/16 & 1/32
Mode: Non hierarchical
Code rate: 1/2, 2/3, 3/4, 5/6 & 7/8
Outer decoder: Reed Salomon (204, 188, 8)
DVB-T2 DEMODULATOR
Transmission mode: FFT 1K, 2k, 4K, 8k, 8K EXT,16K, 16K EXT, 32K & 32K EXT MFN and SFN network supported
Constellation: QPSK, 16-QAM, 64-QAM & 256-QAM
Guard interval: 1/4, 19/128, 1/8, 19/256, 1/16, 1/32 & 1/128
Single and multiple-PLPs
LDPC Code rate: 1/2, 3/5, 2/3, 3/4, 4/5 & 5/6
Outer decoder: BCH
DATA PORT
ETHERNET 10/100BT
Fully integrated IEEE 802.3/802.3u 10/100 base T-Physical layer
Auto-negotiation 10/100, Full/Half Duplex
Adaptive equaliser, Baseline wander correction
USB
Host USB 2.0 High speed (480 Mbits/s)
PROCESSOR AND MEMORIES
Processor: STi7105 - 800MIPS
EEPROM emulated into Flash
2½’’ HARD DISK DRIVE
Capacity: 500 GB
Interface S-ATA
Noise under operation (typ.): <30dBA
VIDEO DECODING
MPEG2
Standard MPEG-2 MP@HL for 50 Hz
Input rates (max): 15 Mbit/s
MPEG-4 Part 10 / H.264
MPEG-4 AVC HP@L4 (HD) for 50 Hz
Input rates (max): 20 Mbit/s for HP@L4
MPEG-4 AVC HP@L3 (SD) for 50 Hz
Input rates (max): 10 Mbit/s for HP@L3
CABAC and CAVLC decoding
Supports all intra/inter prediction modes and block sizes
I,P and B picture types
Fidelity range extensions (8x8 Transforms, 8x8 Spatial Prediction Mode, Dynamic Quantization Matrix)
AUDIO DECODING
Stereo 2.0
MPEG-1 layer I & II (Musicam)
MPEG-2 layer II
AAC
Mode: Mono, stereo, joint stereo
Sampling rates 32, 44.1 or 48 KHz
Multicanal 5.1
DOLBY Digital Mode : pass through and down mixing
DOLBY Digital+ Mode : pass through, transcoding Dolby Digital, and down mixing
OUTPUT RESOLUTION FORMAT
For HD broadcast
1280x720 @ 50 Hz (progressive)
1920x1080 @ 25 Hz (interlaced)
Unscaled (original format) or scaled
576i and 720p by set up menu
Zoom function on HDMI: 4/3, 14/9 zoom, 16/9 zoom and Full screen
For SD broadcast
720x576 @ 50 Hz interlaced
Unscaled (original format) or scaled
720p and 1080i by set up menu
Zoom function on HDMI: 4/3, 14/9 zoom, 16/9 zoom and Full screen
Format function on TV SCART
4/3 and 16/9 with conversion Pan and Scan, Letter box
SD INPUT/OUTPUT
SCART (TV setup configuration)
RGB out, PAL in/out, volume control Audio R/L, Fast blanking out, Slow blanking out
SCART (Recorder setup configuration)
RGB in, PAL out , S-video out, fixed volume Audio R/L, Slow blanking in
HDMI OUTPUT
HDMI 1.3 and HDCP 1.1
VIDEO: YCrCb
AUDIO
2 channels PCM in case of MPEG1-layer II
2 channels PCM in case of HEAAC
Dolby Digital or PCM in case of Dolby Digital beat stream(*)
Dolby Digital Plus, Dolby Digital or PCM in case of Dolby Digital Plus beat stream (*)
(*) according of E(EDID) information
AUDIO OUTPUT
HiFi audio output
Adjustable audio level
Mono/stereo in case of MPEG1 layer II
Two channnels down mixed in case of Dolby Digital, Dolby Digital Plus, HEAAC audio stream
Coax S/PDIF
Stereo audio setup: Fixed audio level -20 dBLKFS
Two channels PCM in case of MPEG1-layer II stream
Two channels PCM downmix in case of Dolby Digital / Dolby Digital Plus/HEAAC streams
Multicanal audio set up: Fixed audio level -31 dBLKFS
Two channels PCM in case of MPEG1-layer II stream
Originally received bit stream in case of Dolby Digital
Transcoded Dolby Digital in case of Dolby Digital Plus
FRONT PANEL
4 digits 7 segments blue colour display
IR sensor: 38 KHz
1 x bicolour led
3 x buttons: On/Off, P+, P-
1 x USB 2.0 (Type A Host)
REAR PANEL
1 x RF input (IEC169-24-F)
1 x RF output (IEC169-24-M)
1 x RJ45 (ETH 10/100BT)
1 x TV SCART (IEC60807-9)
2 x RCA (Stereo L/R)
1 x RCA (S/PDIF)
1 x HDMI with HDCP
POWER SUPPLY
Mains supply voltage 220-240 V ~50 Hz
External AC/DC adaptor
Power (IEC 62087 Ed2): 25W
Standby consumption: < 2W
PHYSICAL SPECIFICATIONS
Size (wxdxh): 260x160x48 mm
Weight: ~0.8 Kg
Operating temperature: 0°C to +40°
Storage temperature: -25°C to +65°C
What's in the box
1 x EU Power cable
1 x Remote control (range: 10.5m/33 feet)
2 x Saline AAA-R03 batteries
1 x HDMI cord
1 x User manual |
