Replacing The Digitizer. O2 XDA II.

[El Muelio]

I have my XDA open in front of me, the screen is off, and it is attached the digitizer via an electrical strip.

Where do I go from here? I can see that I am supposed to unattach the original digitizer and attach the new one, but it appears to have been siliconed, or glued with some kind of very hard resin.

EDIT: After all that, it was tape.

[El Muelio]

I have replaced the digitizer, glued the new screen onto the metal mounting, and it doesn't work. As reguards the connection, I cleaned it with circuit cleaner and taped it back down as it was before.

[getsurfers]

Have you tried doing a soft reset?

Also what caused the original touch screen to fail?

[ericpda]

is the problem with the digitezer or just the lcd screen, i guess, maybe ,it just the probem with lcdscren.

[El Muelio]

I cracked the digitizer itself. Parts of the old one still worked, where there wasn't a crack breaking the vertical and horizontal lines from the point I had touched to the edges of the screen.

I bought and fitted a new one, taped the connector on, and it doesn't work.

[getsurfers]

Chances are the screen break did more damage that you think, or the new one is faulty.

Any reason you didnt get O2 to replace it?