Quote:
|
Originally Posted by Stevie TomTom Navigator + 3rd Party GPS Receiver
1) Install the tomtom application
2) Update the GPS driver from www.tomtom.com support -> download -> tomtom navigator 3 -> update october 2004 tomtom navigator 3.07. (this update is required when using tomtom with any new iPAQ).
3) If you have a BT GPS follow the guide to setup the GPS with BT Manager on PPC2003 CLICK HERE
For your correct GPS passkey CLICK HERE (GPS Passkey)
4) For BT GPS
Click on start -> tomtom gps -> GPS (bottom left)
select:
TomTom Wireless GPS
Bluetooth Serial Port com (com number from 1-8 check below)
Bluetooth Com settings If you have: iPAQ
1940 either 5-8 dependant on rom version.
2210 com 8.
4150 com 6
5550 com 8
2110 com 8
2410 com 8
2750 com 8
3715 com 6
4700 com 8 Dell
X5 bluetooth serial port com 7
x30 bluetooth serial port com 7 i-mate
Jam Bluetooth GPS or com 5
i-mate Bluetooth GPS
PDA 2k Bluetooth GPS Cabled Receiver's and hybrid
We always recommend that you turn IR of on your PDA, on some PDA's like the XDA and i-mates + others com 1 is locked to IR. If you get the error cannot open com1, com 1 does not exist you need to disable IR please follow:
Click on start -> settings -> connections -> beam -> untick the box.
Holux CR100, GM210
Select
TomTom Navigator GPS
Serial Cable com 1 |
Hi, just purchased a Mio P550 PDA with built in GPS receiver. It came with a TomTom Navigator 6 card, which I've just set up and activated, etc.... the problem is this:
I sat and waited while I thought it was searching for satellites.... and now all I get is a 'No GPS device!' message. Do I have to set up the Mio to tell the GPS to switch on or something, in the same way that you have to activate Bluetooth?
HELP?! ... oh, and yeah, thanks in advance!!!!!