classic road angel!

hello all,nice to see a forum dedicated to sat nav and stuff!.
I need some advice,I am using a dell x30 and tomtom navagaitor5 when i use my holux gm-210 receiver all is good!,what I really want to use is my classic road angel(as the gps receiver)to my seidio gps ready mount(G2500)via the lead which i also have.I can not however get the sat nav software to connect to the r/a(no gps found) would any one know the settings i.e the baud rate,which port it connects to, com1 com3,etc.The lead my be faulty but I would like to explore every avenue!.
thanks for any help,
Regards
Simon

[Charlie]

Welcome to our forums.
If you have the correct lead to connect your RA to your mount then you should get it working on COM1 @ 4800 baud.

Originally Posted by Charlie

Welcome to our forums.
If you have the correct lead to connect your RA to your mount then you should get it working on COM1 @ 4800 baud.

also good to enable gps setting in your road angel menu!
lol
thanks for your help Charlie