GPRS Setup

Hi,ive been trying to set up the GPRS connection on a rw6815.

I read the manual to no avail,so contacted o2 and they sent me this:

1. Tap Start
2. Tap Settings
3. Tap the Connections tab
4. Tap the Connections icon
5. Under 'My Work Network' tap 'Manage existing connections'
6. If a connection already exists then tap 'Edit'. If no connections are present tap 'New'
7. In the 'Enter a name for the connection' field enter 'GPRS WAP'
8. The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
9. Tap 'Next'
10. In the 'Access Point Name' field enter 'payandgo.o2.co.uk'
11. Tap 'Next'
12. In the 'Username' field enter 'payandgo'
13. In the 'Password' field enter 'password'
14. Leave the Domain field blank
15. Tap 'Advanced'
16. In the 'TCP/IP' tab ensure 'Use server-assigned IP address' is selected
17. Tap the 'Servers' tab
18. Ensure the 'Use server-assigned address is selected
19. Tap 'OK' in the top right corner
20. Tap 'Finish'
21. Tap 'Proxy Settings' tab
22. Ensure that 'This network connects to the Internet' box is ticked
23. Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
24. Tap 'Advanced'
25. Tap the 'WAP' option
26. In the 'Server' field enter '193.113.200.195'
27. In the 'Port' field enter '9201'
28. Tap 'OK' four times to exit

I manged to follow this exactley as its stated in both "My ISP" and "My Work Network" but im still having difficulty connecting through ie.

Any advice ?

Chris

OK,i set the "programs that automatically connect to the internet should connect using" "my work network" and that got me onto www.o2.co.uk in ie.

Anything other than that i get the message:

"the page cannot be displayed or downloaded because the connection was lost,check the connection and try again later"

I have the big [G] and a little [G] icon in the top right hand corner which states its connected.

Hmm

Full web access is not available for o2 payg customers

I need a contract for o2's "Mobile Web" sevice for full internet access
ah well...